Ok, so here's some photos of putting in the electrical. Overall this part of the building process was pretty conventional. The two things that I did that were different were 1) I used conduit in the walls instead of romex to get some electromagnetic shielding and to keep the wires away from the light straw/clay, and 2) I did not install any electrical on the two walls of the house that the bed touches, again to keep the emf down.
Ok, here's the photos:
Chris running some conduit:
The future home of the lightswitch:
The conduit going over to the desk:
Chris marking the location of the exterior boxes:
Chris and the lightswitch (apparently photos of Chris are more interesting than photos of electrical):
No comments:
Post a Comment